Indoor Unit
Step
5
Loosen the lock screw
and remove the fan
motor.
6
Pull out the fan motor
from the fan rotor.
116
Procedure
Lock screw
Fan motor
Fan motor
Points
When reassembling the fan
rotor, provide as much as
5 mm of play between the
side face of the rotor and the
bottom frame.
Side face of rotor
5 mm
(R14544)
(1) Insert the fan motor with
approx. 5 mm left.
(2) Tighten the screw until it
stops. Then turn the screw
in one scroll.
(3) Move the fan rotor and
confirm the fan motor and
the fan rotor are installed
appropriately.
(4) Tighten the screw
completely if appropriate.
(5) If not appropriate, go back to
(1).
(R14543)
Removal Procedure
SiBE041102_A
Side face of
bottom frame
(R2808)
(R9582)