Park - AT&T SYSTEM 25 User Manual

Park

Parked calls are held calls that can be picked up from any voice
terminal within your System 25. If a parked call is not picked up
within two minutes, it will ring at the voice terminal that parked
the call. Only one call can be parked at a time by a voice terminal.
Parking a Call
1
2
3
4
5
6
Parked Call
Picking Up a
1
2
3
Note
You can program either of these
into memory buttons. If you do
appropriately.
P r e s s
Listen for confirmation tone and dial tone.
Dial
Listen for confirmation tone and dial tone.
If the call is for someone else, dial or page
that person. Tell the person the PDC of the
voice terminal that parked the call.
Note
If the person does not answer, press
twice to return to the parked call. If you hear
dial tone, press
to the parked call.
Hang up.
Lift the handset (or press
listen for dial tone.
Dial
on which the call is parked.
Dial the PDC
feature access codes (*5 and *8)
so, label the button(s)
once more to return
) and
17