Mounting; Symbol Ms1204Fzy/Ms2204/Ms2204Vhd Mounting Dimensions - Symbol MINISCAN MSXX04 Integration Manual

2 - 2 Symbol MiniScan MSXX04 Series Integration Guide

Mounting

There are three mounting holes (threaded inserts) on the bottom of the Symbol MS1204FZY/2204/2204VHD/3204
chassis; two mounting holes on the Symbol MS954.
The following figures provide mounting dimensions for the MiniScan scanner housings. For a mounting template,
see Chapter 12, Mounting
NOTE Use only non-magnetic M3x.5 screws with a maximum length of 3.6M to mount the MiniScan scanner
chassis.

Symbol MS1204FZY/MS2204/MS2204VHD Mounting Dimensions

Symbol MS1204FZY/MS2204/MS2204VHD Mounting Dimensions
Figure 2-1
Templates.
Threaded Inserts
Note:
Dimensions are in inches [mm].