Table of Contents
Advertisement
MS-120X and MS-220X Integration Guide
Mounting
There are three mounting holes (threaded inserts) on the bottom of the chassis.
Figure 2-1
provides mounting dimensions for the MiniScan scanner housing. For a
mounting template, see Mounting Template on page 15-1.
Note: Use only non-magnetic M3x.5 screws with a maximum length of
3.6M to mount the MiniScan scanner chassis.
Note:
Dimensions are in
inches [mm].
Figure 2-1. MS-120X/MS-220X Mounting Dimensions
2-2
Threaded Inserts
Advertisement
Table of Contents
