Set Lengths For Msi Plessey - Symbol MINISCAN MSXX04 Integration Manual

10 - 74 Symbol MiniScan MSXX04 Series Integration Guide

Set Lengths for MSI Plessey

Parameter # L1 = 1Eh, L2 = 1Fh
The length of a code refers to the number of characters (i.e., human readable characters) the code contains, and
includes check digits. Lengths for MSI Plessey can be set for any length, one or two discrete lengths, or lengths
within a specific range.
One Discrete Length - Select this option to decode only those codes containing a selected length. For example,
select MSI Plessey One Discrete Length, then scan 1, 4, to decode only MSI Plessey symbols containing 14
characters. Numeric bar codes begin on
the Cancel bar code on
Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For
example, select MSI Plessey Two Discrete Lengths, then scan 0, 2, 1, 4, to decode only MSI Plessey symbols
containing 2 or 14 characters. Numeric bar codes begin on
incorrect entry, scan the
Length Within Range - Select this option to decode codes within a specified range. For example, to decode MSI
Plessey symbols containing between 4 and 12 characters, first scan MSI Plessey Length Within Range, then
scan 0, 4, 1 and 2 (single digit numbers must always be preceded by a leading zero). Numeric bar codes begin on
page 10-111. To change the selection or cancel an incorrect entry, scan the
Any Length - Scan this option to decode MSI Plessey symbols containing any number of characters.
NOTE Selecting this option can lead to misdecodes for MSI Plessey codes.
page 10-111. To change the selection or cancel an incorrect entry, scan
page 10-113.
MSI Plessey - One Discrete Length
Cancel bar code on page
MSI Plessey - Two Discrete Lengths
*MSI Plessey - Length Within Range
MSI Plessey - Any Length
page 10-111. To change the selection or cancel an
10-113.
Cancel bar code on page 10-113.