Routing The Cables; Mounting The Scanner To A Surface - Symbol LS 7708 Quick Reference Manual

Routing the Cables

The scanner case has several channels to route the outgoing cables so that
they are organized and don't hinder the scanner's placement. After placing the
cable connectors in the appropriate scanner ports, route the cables through the
nearest channel.
For a cable with a Y-connector (containing both power and interface
connectors):
1. Connect the power and interface cables to the appropriate ports.
2. Route the cables according to the following diagram.

Mounting the Scanner to a Surface

Caution: The LS 7708 requires use of the mounting bracket for
proper operation and saftley. Failure to use the bracket
can result in scanner instability.
Connections to power and host
ports, side exit: keep power cable
straight and route it ahead with
interface cable.
Connections to power and hand-
held scanner ports, side exit:
curl power cable and route it back
towards interface cable.
5