Set Lengths For Code 11 - Symbol MINISCAN MSXX04 Integration Manual

10 - 60 Symbol MiniScan MSXX04 Series Integration Guide

Set Lengths for Code 11

Parameter # L1 = 1Ch, L2 = 1Dh
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Lengths for Code 11 can be set for any length, one or two discrete lengths, or lengths
within a specific range.
One Discrete Length - Select this option to decode only those codes containing a selected length. For example,
select Code 11 One Discrete Length, then scan 1, 4, to limit the decoding to only Code 11 symbols containing 14
characters. Numeric bar codes begin on
the Cancel bar code on
Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For
example, select Code 11 Two Discrete Lengths, then scan 0, 2, 1, 4, to limit the decoding to only Code 11
symbols containing 2 or 14 characters. Numeric bar codes begin on
cancel an incorrect entry, scan the
Length Within Range - Select this option to decode only those codes within a specified range. For example,
to decode Code 11 symbols containing between 4 and 12 characters, first scan Code 11 Length Within Range,
then scan 0, 4, 1 and 2 (single digit numbers must always be preceded by a leading zero). Numeric bar codes
begin on page 10-111. To change the selection or cancel an incorrect entry, scan the
10-113.
Any Length - Scan this option to decode Code 11 symbols containing any number of characters.
page 10-111. To change the selection or cancel an incorrect entry, scan
page 10-113.
Code 11 - One Discrete Length
Cancel bar code on
Code 11 - Two Discrete Lengths
*Code 11 - Length Within Range
Code 11 - Any Length
page 10-111. To change the selection or
page 10-113.
Cancel bar code on page