Set Lengths For Discrete 2 Of 5 - Symbol MINISCAN MSXX04 Integration Manual

10 - 68 Symbol MiniScan MSXX04 Series Integration Guide

Set Lengths for Discrete 2 of 5

Parameter # L1 = 14h, L2 = 15h
The length of a code refers to the number of characters (i.e., human readable characters) the code contains, and
includes check digits. Lengths for D 2 of 5 can be set for any length, one or two discrete lengths, or lengths within
a specific range.
One Discrete Length - Select this option to decode only those codes containing a selected length. For example,
select D 2 of 5 One Discrete Length, then scan 1, 4, to decode only D 2 of 5 symbols containing 14 characters.
Numeric bar codes begin on
bar code on page
Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For
example, select D 2 of 5 Two Discrete Lengths, then scan 0, 2, 1, 4, to decode only D 2 of 5 symbols
containing 2 or 14 characters. Numeric bar codes begin on
incorrect entry, scan the
Length Within Range - Select this option to decode codes within a specified range. For example, to decode D
2 of 5 symbols containing between 4 and 12 characters, first scan D 2 of 5 Length Within Range, then scan 0, 4,
1 and 2 (single digit numbers must be preceded by a leading zero). Numeric bar codes begin on
change the selection or cancel an incorrect entry, scan the
Any Length - Scan this option to decode D 2 of 5 symbols containing any number of characters.
NOTE Selecting this option can lead to misdecodes for D 2 of 5 codes.
page 10-111. To change the selection or cancel an incorrect entry, scan the
10-113.
*D 2 of 5 - One Discrete Length
Cancel bar code on
D 2 of 5 - Two Discrete Lengths
D 2 of 5 - Length Within Range
page 10-111. To change the selection or cancel an
page 10-113.
Cancel bar code on
D 2 of 5 - Any Length
Cancel
page 10-111. To
page 10-113.