Convert Gs1 Databar To Upc/Ean - Symbol MINISCAN MSXX04 Integration Manual

10 - 82 Symbol MiniScan MSXX04 Series Integration Guide

Convert GS1 DataBar to UPC/EAN

Parameter # F0h 8Dh
NOTE This option is supported by the MS1204FZY only.
This parameter only applies to GS1 DataBar-14 and GS1 DataBar Limited symbols not decoded as part of a
Composite symbol. When this conversion is enabled, GS1 DataBar-14 and GS1 DataBar Limited symbols
encoding a single zero as the first digit have the leading '010' stripped and the bar code reported as EAN-13.
Bar codes beginning with two or more zeros but not six zeros have the leading '0100' stripped and the bar code
reported as UPC-A. The UPC-A Preamble parameter to transmit the system character and country code applies to
converted bar codes. Note that neither the system character nor the check digit can be stripped.
Enable Convert GS1 DataBar to UPC/EAN
(01h)
*Disable Convert GS1 DataBar to UPC/EAN
(00h)