Notational Conventions - Symbol MINISCAN MSXX04 Integration Manual

xiv Symbol MiniScan MSXX04 Series Integration Guide
•
Chapter 7, Symbol MS3204
MS3204 scanner.
•
Chapter 8, Symbol MS954
MS954 scanner.
•
Chapter 9, Maintenance and
MiniScan scanners.
•
Chapter 10, Parameter Menus
programming, and hexadecimal equivalents for host download programming.
•
Chapter 11, Simple Serial Interface (SSI)
(SSI) Programmer's Guide.
•
Chapter 12, Mounting
•
Appendix A, ASCII Character
data transmission.

Notational Conventions

The following conventions are used in this document:
•
Italics are used to highlight chapters and sections in this and related documents.
•
bullets (•) indicate:
• Action items
• Lists of alternatives
• Lists of required steps that are not necessarily sequential
•
Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.
NOTE This symbol indicates something of special interest or importance to the reader. Failure to read the note
will not result in physical harm to the reader, equipment or data.
CAUTION
!
WARNING
Specifications, provides the technical and scanning specifications for the Symbol
Specifications, provides the technical and scanning specifications for the Symbol
Troubleshooting, provides information on maintaining and troubleshooting the
describes the programmable parameters, provides bar codes for
Templates, provides mounting templates for the MiniScan scanners.
Sets, provides prefix and suffix values that can be assigned for ASCII character
This symbol indicates that if this information is ignored, the possiblity of data or material damage may
occur.
This symbol indicates that if this information is ignored the possibility that serious personal
injury may occur.
describes scanner-specific updates to the Simple Serial Interface