Snapshot Aiming Pattern
Parameter # F0h, 2Ch
Select Enable Snapshot Aiming Pattern to project the aiming pattern when in Snapshot Mode, or Disable
Snapshot Aiming Pattern to turn the aiming pattern off.
Disable Snapshot Aiming Pattern
(00h)
Image Cropping
Parameter # F0h, 2Dh
This parameter crops a captured image. If Disable Image Cropping is selected, the full 640 x 480 pixels are
presented. If Enable is selected, the imager crops the image to the pixel addresses set in
on page
7-14.
Enable Image Cropping
(01h)
Imager Preferences 7 - 13
*
Enable Snapshot Aiming Pattern
(01h)
Crop to Pixel Addresses
*
Disable Image Cropping
(Use Full 640 x 480 Pixels)
(00h)