Intercharacter Gap Size; Report Version - Motorola Symbol MS4404 Integration Manual

11 - 76 Symbol MS4404/MS4407 Integration Guide

Intercharacter Gap Size

Parameter # F0h, 7Dh
The Code 39 and Codabar symbologies have an intercharacter gap that is typically quite small. Due to various bar
code-printing technologies, this gap can grow larger than the maximum size allowed, preventing the imager from
decoding the symbol. If this problem occurs, capture the Large Intercharacter Gaps parameter to tolerate these
out-of-specification bar codes.
*
Normal Intercharacter Gaps

Report Version

Capture the bar code below to report the version of software currently installed in the imager.
Report Software Version
(06h)
Large Intercharacter Gaps
(0Ah)