Time Delay to Low Power Mode (continued)
1 Minute
(21h)
15 Minutes
(2Bh)
Decode Session Timeout
Parameter # 88h
This parameter sets the maximum time decode processing continues during a decode attempt. It is programmable
in 0.1 second increments from 0.5 to 9.9 seconds. The default timeout is 9.9 seconds.
To set a Decode Session Timeout, capture the bar code below. Next, capture two numeric bar codes from
Appendix D, Numeric Bar Codes
zero. For example, to set a Decode Session Timeout of 0.5 seconds, capture the bar code below, then capture the
0 and 5 bar codes. To correct an error or change the selection, capture Cancel on page D-3.
Decode Session Timeout
that correspond to the desired on time. Single digit numbers must have a leading
User Preferences
5 Minutes
(25h)
1 Hour
(31h)
6 - 9