Code 128 Emulation - Motorola Symbol MS4404 Integration Manual

Code 128 Emulation

Parameter # 7Bh
When this parameter is enabled, the SE4400 transmits data from certain MicroPDF417 symbols as if it was
encoded in Code 128 symbols. Transmit AIM Symbology Identifiers must be enabled for this parameter to work.
If Code 128 Emulation is enabled, these MicroPDF417 symbols are transmitted with one of the following prefixes:
]C1 if the first codeword is 903-907, 912, 914, 915
]C2 if the first codeword is 908 or 909
]C0 if the first codeword is 910 or 911
If disabled, they are transmitted with one of the following prefixes:
]L3 if the first codeword is 903-907, 912, 914, 915
]L4 if the first codeword is 908 or 909
]L5 if the first codeword is 910 or 911
Capture a bar code below to enable or disable Code 128 Emulation.
Enable Code 128 Emulation
(01h)
Symbologies 11 - 67
*
Disable Code 128 Emulation
(00h)