Usb Keyboard Fn 1 Substitution; Function Key Mapping - Motorola Symbol MS4404 Integration Manual

USB Keyboard FN 1 Substitution

This option applies only to the USB HID Keyboard Emulation device. When enabled, this allows replacement of
any FN 1 characters in an EAN 128 bar code with a Key Category and value chosen by the user (see
Substitution Values on page 12-6
Enable

Function Key Mapping

ASCII values under 32 are normally sent as a control-key sequences (see
parameter is enabled, the keys in bold are sent in place of the standard key mapping. Table entries that do not
have a bold entry remain the same whether or not this parameter is enabled.
*
Disable Function Key Mapping
to set the Key Category and Key Value).
Symbol MS4407 - USB Interface 10 - 9
*
Disable
Table 10-2 on page
Enable Function Key Mapping
FN1
10-11). When this