Enable/Disable Upc-E1; Enable/Disable Ean-8/Jan-8 - Motorola Symbol MS4404 Integration Manual

11 - 8 Symbol MS4404/MS4407 Integration Guide

Enable/Disable UPC-E1

Parameter # 0Ch
UPC-E1 is disabled by default.
To enable or disable UPC-E1, capture the appropriate bar code below.
NOTE UPC-E1 is not a UCC (Uniform Code Council) approved symbology.
Enable UPC-E1

Enable/Disable EAN-8/JAN-8

Parameter # 04h
To enable or disable EAN-8/JAN-8, capture the appropriate bar code below.
*
Enable EAN-8/JAN-8
(01h)
(01h)
*
Disable UPC-E1
(00h)
Disable EAN-8/JAN-8
(00h)