Mantel Projections; Flooring Considerations; Hearth Extension - Heat & Glo Infinity Owner's Manual

D. Mantel Projections
1/2 NON-COMBUSTIBLE
MATERIAL
5
4
3
2
1
2
1
TOP FRONT EDGE
OF FIREPLACE
NOTE: ALL DIMENSIONS
SHOWN IN INCHES.
Figure 3.3 Clearances to mantels or other combustibles
above appliance
E. Flooring Considerations
If the fi replace is to be installed prior to fi nished fl oor con-
struction (i.e. tile, carpet, etc.) in front of the fi replace, pro-
visions must be made to accommodate for the difference
in height between the fl oor underneath the fi replace and
the fi nished fl oor to be installed in front of the fi replace.
CEILING
12
11
10
9
8
7
12
6
11
10
9
8
7
6
5
4
3
Heat & Glo • Infi nity • 2003-900 Rev. N • 2/10
TOP VIEW
31
Note: Clearance from opening to
perpendicular wall that extends
past the front edge of fi replace.
Figure 3.4 Clearances to Mantel Legs or Wall Projections
F. Hearth Extension
A hearth extension may be desirable for aesthetic reasons.
However, ANSI or CAN/CGA testing standards do not require
hearth extensions for gas fi replace appliances.
2-1/2 in.
(Acceptable on both sides of opening.)
UNLIMITED
9