Positioning The Logs - Heat & Glo Infinity Owner's Manual

F. Positioning the Logs Log Set Assembly: LOGS-INFINITY
CAUTION: Logs are fragile!
Denotes Flat Spots
Carefully remove the logs from the
7
packaging.
Place logs on a piece of cardboard
as shown in Figure 1. The logs will
2
be assembled in a similar orienta-
1
tion to their positions in Figure 1.
Note: Burner is shown white to im-
prove contrast.
5 6
4
3
1
1
LOG #1 (SRV2003-702):
Place log #1 on the back right of the grate. Place the two slots in the bottom of the log over
the two tabs in the grate. The log may be slightly unstable at this time but will become more stable with the addition of the
other logs.
2
2
LOG #2 (SRV2003-701):
Place log #2 on the back left of the grate. Place the two slots in the bottom of the log over
the two tabs in the grate.
2003-925 12/02
34 Heat & Glo • Infi nity • 2003-900 Rev. N • 2/10