Switching Between Stereo And Mono; Changing The Display; Selecting Radio Text Display - Blaupunkt Frankfurt C70 Operating Instructions Manual

Interference-related wavelength change
(SHARX)
With the SHARX function you can eliminate
interference from neighbouring stations al-
most completely. Activate the SHARX func-
tion in an area of high transmitter density.
Switching SHARX on/off
To switch SHARX on/off,
press the MENU button 8;
press the soft key 4 with the display
allocation "TUN";
press the soft key 4 with the display
allocation "SHRX".
The current status, "SHARX ON" or "NO
SHARX", appears briefly on the display. When
SHARX is activated, an arrow symbol lights
up on the display alongside "SHRX".
Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Switching between stereo and
mono
When radio reception is poor, you can select
the mono radio mode. The transition from ster-
eo to mono is gradual and the car radio will
revert to the stereo mode when switched on
once again.
Press the TUNE button > when in ra-
dio mode.
The radio function menu appears on the dis-
play.
Press the soft key 4 with the display
allocation "NEXT".
The "second page" of the radio function menu
appears on the display.
Press the soft key 4 with the display
allocation "MONO".
The current status "MONO" or "STEREO"
appears briefly on the display. When mono is
activated, an arrow symbol lights up along-
side "MONO".
Press the TUNE button > or wait 8 sec-
onds. The settings are now stored.

Changing the display

You can select the content of the display. In
the top display line (lead line) you can switch
between the station name, frequency, pro-
gramme type and time. In the bottom display
line (DOT field) you can switch between the
time and the memory level.
Press the DIS button : repeatedly until
the desired information - station name,
frequency, programme type or time - ap-
pears in the lead line.

Selecting radio text display

Some radio stations use the RDS signal to
broadcast "main texts", so-called radio texts.
You can allow or block the display of radio
text.
Press the TUNE button > when in radio
mode.
The radio function menu appears on the dis-
play.
Press the soft key 4 with the display
allocation "NEXT".
The "second page" of the radio function menu
appears on the display.
Press the soft key 4 with the display
allocation "RTXT".
Press the TUNE button > or wait 8 sec-
onds. The settings are now stored.
RADIO MODE
55