Storing stations
You can store five stations on the preset
buttons 1, 2, 3, 4, 5 for each of the memory
banks I, II and T.
•
Select the desired memory bank.
•
Tune in a station with the rocker switch
(either automatically or manually).
•
Press and hold down the desired pre-
set button until releases a beep.
Now the station has been stored.
The activated preset button is indicated in
the display.
Note:
Should you tune in a station which has al-
ready been stored before, then the corre-
sponding preset position and memory bank
will briefly flash in the display.
20
Automatically storing the
strongest stations with Travel-
store
You can automatically store the five most
powerful FM stations of your current recep-
tion area sorted according to their signal
strength. This function is particularly conven-
ient on longer trips.
•
Press the BND/TS button for 1 sec.
"T-STORE" will appear in the display.
The five strongest FM stations will be auto-
matically stored on the memory bank "T"
(Travelstore). After this process has been
completed, the radio will play the first sta-
tion stored on preset 1.
If desired, stations can also be stored man-
ually on the Travelstore bank (see "Storing
stations").
Recalling stored stations
You can recall any stored station at the touch
of a button.
•
Select the memory bank with BND/TS.
•
Press the corresponding preset button
briefly to recall the station.
Switching between stereo and
mono
Each time the radio is switched on, stereo
playback is activated automatically.
The unit will gradually switch to mono if re-
ception is poor.
You can also switch between mono and ster-
eo reception manually:
•
Press the lo.m /
button for approxi-
mately 1 sec.
The selected condition will briefly appear in
the display.
Loudness
If the system is played at a low volume lev-
el, the Loudness function creates a more
natural sound by boosting the low frequen-
cy range.
To turn Loudness on/off:
•
Press AUD for about 1 second.
"LD" appears in the dislay, if the Loudness
function is activated.