Clock - Time - Blaupunkt Frankfurt C70 Operating Instructions Manual

CLOCK

CLOCK - Time

Setting the time
The time can be set automatically using the
RDS signal. If no station using this function is
available, the unit attempts to receive the
DCF-77 signal (radio clock) the next time the
unit is switched off. It is also possible for you
to set the clock manually.
Setting the time automatically
To set the time automatically,
press the MENU button 8;
press the soft key 4 with the display
allocation "CLK";
press the soft key 4 with the display
allocation "SYNC" repeatedly until "AU-
TOSYNC" appears on the display.
Once "AUTOSYNC" has been selected and
a station with the RDS time function (RDS-
CT) or the DCF-77 signal has been received,
the clock is set automatically.
Or
Hold down the DIS button : for more
than five seconds when in radio mode.
Note:
If it is not possible to receive a DCF-77 sig-
nal, "NO DCF" will appear briefly on the dis-
play.
If you do not wish to set the time automatical-
ly (e.g. because you wish to set the clock to a
different time zone),
select "SYNC OFF".
66
Setting the time manually
To set the time manually,
press the MENU button 8;
press the soft key 4 with the display
allocation "CLK";
press the soft key 4 with the display
allocation "SET".
The time appears on the display. The hours
flash and can now be set.
Set the hours using the
7.
Once the hours have been set, press
button 7.
the
The minutes now flash.
Set the minutes using the
7.
Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Selecting the 12/24-hour clock
mode
Press the MENU button 8.
Press the soft key 4 with the display
allocation "CLK".
Press the soft key 4 with the display
allocation "MODE".
buttons 7 to switch be-
Press the
tween the 12 and 24-hour mode.
Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
/ buttons
/ buttons