Automatically Storing The Strongest Stations With Travelstore; Recalling Stored Stations; Scanning Stored Stations With Preset Scan; Scanning Stations With Radio Scan - Blaupunkt Malaga RCR 127 Operating Instructions Manual

sponding preset position and memory bank
will briefly flash in the display.
Automatically storing the
strongest stations with Travel-
store
You can automatically store the six most
powerful FM stations of your current recep-
tion area sorted according to their signal
strength. This function is particularly conven-
ient on longer trips.
• Press the BND button for 1 sec.
"T-STORE" will appear in the display.
The six strongest FM stations will be auto-
matically stored on the memory bank "T"
(Travelstore). When this process has been
completed, the radio will play the first sta-
tion stored on preset 1.
If desired, stations can also be stored man-
ually on the Travelstore bank (see "Storing
stations").

Recalling stored stations

You can recall any stored station at the touch
of a button.
• Select the memory bank with BND.
• Press the corresponding preset button
briefly to recall the station.
Scanning stored stations with
Preset Scan
You can have all of the stored stations briefly
scanned on all wavebands.
To start Preset Scan:
• Press SCA for approximately 1 sec.
All of the stored stations to be received will
be scanned one after the other.
To select a scanned station and switch
off Preset Scan:
• Press SCA briefly.
Note:
If "TA" appears, the system will scan the
stored traffic stations only.
Scanning stations with
Radio Scan
You can also scan all of the stations which
can currently be received.
To start the Scan function:
• Press SCA briefly.
The scanned frequency or the station name
will start flashing in the display. During the
actual scanning process "FM-SCAN" or
"AM-SCAN" will be displayed.
To select a scanned station and switch
off Radio Scan:
• Press SCA briefly.
If no station is selected, the scan function
will be automatically switched off after the
frequency band has been run through com-
pletely. The unit will tune in the station se-
lected before starting the scan.
Selecting the seek tuning sensi-
tivity
You can alter the automatic seek tuning
sensitivity.
If "lo" is displayed, the radio will only pick up
strong, local stations.
If "lo" does not light up, the radio will also
pick up weaker, distant stations.
To switch the seek tuning sensitivity:
• Press SRC for about 1 second.
The sensitivity level can be altered sepa-
rately in both modes. Please refer to "DSC
programming - S-LO, S-DX).
Switching between stereo and
mono
Each time the radio is switched on, stereo
playback is activated automatically.
The unit will gradually switch to mono if re-
ception is poor.
33