Overview Installation Troubleshooting Contact
Setting Up a USB Driver
The following subsections describe setting up a USB driver if you connect a PC to the USB port on the SBG900.
Perform one of the following procedures based on your Windows version:
•
Setting Up a USB Driver in Windows 98
•
Setting Up a USB Driver in Windows 2000
•
Setting Up a USB Driver in Windows Me
•
Setting Up a USB Driver in Windows XP
The SBG900 USB driver does not support Macintosh or UNIX computers. For those systems, you can connect
through Ethernet only .
Caution!
Be sure the Motorola SURFboard Wireless Cable Modem Gateway CD-ROM is inserted in the
CD-ROM drive before you plug in the USB cable.
If you have a problem setting up the USB driver, remove it by performing one of the following procedures:
•
Removing the USB Driver from Windows 98 or Windows Me
•
Removing the USB Driver from Windows 2000
•
Removing the USB Driver from Windows XP
Home
Print
Configuration: Basic Gateway TCP/IP Wireless USB
X
78
Exit
FAQ
Specifications Glossary License
SBG900 User Guide