Precautions; Signing Up For Service - Motorola SBG900 User Manual

Overview Installation Troubleshooting Contact

Precautions

Postpone SBG900 installation until there is no risk of thunderstorm or lightning activity in the area. SBG900.
To avoid damaging the SBG900 or computers with static electricity:
Before you connect or
disconnect the USB or
Ethernet cables, always
touch the coaxial cable
connector on the SBG900.
•
To avoid potential shock, always unplug the power cord from the wall outlet or other power source before
disconnecting it from the SBG900 rear panel.
•
To prevent overheating the SBG900, do not block the ventilation holes on the sides of the unit.
•
Do not open the unit. Refer all service to your cable service provider.
•
Wipe the unit with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners
directly on the unit or use forced air to remove dust.

Signing Up for Service

You must sign up with a cable service provider to access the Internet and other online services.
To activate your service, call your local cable service provider.
You need to provide the MAC address marked HFC MAC ID printed on the
you printed this document, you can record it here:
00 : ______ : ______ : ______ : ______ : ______
You should ask your cable service provider the following questions:
•
Do you have any special system requirements?
•
When can I begin to use my SBG900?
•
Are there any files I need to download after I am connected?
•
Do I need a user name or password to access the Internet or use e-mail?
Home Print
Configuration: Basic Gateway TCP/IP Wireless USB
X
16
Exit
FAQ Specifications Glossary License
Always make the wall
connection first.
Label on the Bottom of the
SBG900 User Guide
SBG900. If