Overview Installation Troubleshooting Contact
Setting Up a USB Driver in Windows XP
1
Insert the Motorola SURFboard Wireless Cable Modem Gateway CD-ROM in the CD-ROM drive. This CD
contains the USB drivers and must be inserted and read by the PC before you connect the SBG900 to the
PC.
2
Connect the USB cable as shown in
A few seconds after you complete the USB connection, the Found New Hardware Wizard window is
displayed:
3
Be sure "Install the software automatically" is selected.
4
Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is
successful, the following window is displayed:
Although your SBG model number may be different than in the images in this guide, the procedure
is the same.
Home
Print
Configuration: Basic Gateway TCP/IP Wireless USB
USB
Connection.
X
87
Exit
FAQ
Specifications Glossary License
SBG900 User Guide