Motorola SBG900 User Manual page 29

Overview Installation Troubleshooting Contact
5
Click Log In to display the SBG900 user configuration and status windows:
Click To Perform
Cable Configure and monitor the cable system connection.
Gateway Configure and monitor the gateway preferences (see
Wireless Configure and monitor the wireless interface (see
Firewall Configure and monitor the firewall (see
Admin Changing the Default
Info Display information about the
Reboot Restart the SBG900. It is the same as pressing the reset button on the rear panel for less than five
seconds.
Log Out Log out of the SBG900.
If you have difficulty starting the SBG900 Setup Program, see "Troubleshooting" for information.
Router is a configuration option that may appear on your window but may not be supported.
For some settings, after you edit the field and click Apply, you are warned that you must reboot for your change
to take effect. Rebooting takes 10 to 15 seconds. After rebooting, you must log-in again.
Home Print
Configuration: Basic Gateway TCP/IP Wireless USB
"Setting the Firewall
Password.
SBG900
Setup Program.
X
23
Exit
FAQ Specifications Glossary License
Configuring the Gateway).
"Setting Up the Wireless LAN").
Policy").
SBG900 User Guide