Motorola SBG900 User Manual page 87

Overview Installation Troubleshooting Contact
8
Click Next. The following window is displayed:
9
Select The updated driver... and click Next. If the following window is not displayed, verify that the Motorola
SURFboard Wireless Cable Modem Gateway CD-ROM is properly inserted in the CD-ROM drive. If you still
cannot find the correct driver file, click Cancel to cancel the installation and perform the procedure for
"Removing the USB Driver from Windows 98 or Windows
Although your SBG model number may be different than in the images in this guide,
the procedure is the same.
10
After the window shown under step 9 is displayed, click Next.
If a window with the message Copying Files... displays and asks for the CD-ROM drive, type the CD-ROM
drive letter (for example, "D:") and click OK.
If an Insert Disk window similar to the one below is displayed, Windows 98 system files are needed to
complete the installation. To install the files, insert your Windows 98 CD-ROM in the CD-ROM drive and
click OK.
Home Print
Configuration: Basic Gateway TCP/IP Wireless USB
X
81
Exit
FAQ Specifications Glossary License
Me". Then repeat this procedure.
SBG900 User Guide