Setting Up A Usb Driver - Motorola SBV5120 User Manual

Introduction
9
To connect the telephone line, plug a phone wire into the Tel 1 connector. You can also connect a second
telephone line to the Tel 2 connector.
Caution
Contact your cable service provider before connecting your VoIP cable
modem to your existing telephone wiring. Do not connect the telephone
wire to a traditional telephone (PSTN) service.
Be sure the phone connectors are neither connected together nor
connected to wall jacks on the same network.

Setting Up a USB Driver

The following subsections describe setting up a USB driver. Perform the appropriate procedure for your Windows
version:
•
"Setting Up a USB Driver in Windows 98"
•
"Setting Up a USB Driver in Windows 2000"
•
"Setting Up a USB Driver in Windows Me"
•
"Setting Up a USB Driver in Windows XP"
When you finish setting up the USB driver, you can continue with
The SURFboard VoIP cable modem USB driver does not support Macintosh or UNIX computers. For those
systems connect through Ethernet only.
Home Print
Installation
Be sure the SURFboard VoIP Cable Modem
CD-ROM is inserted in your CD-ROM drive
before you plug in the USB cable.
on page 10
on page 15
on page 14
on page 18
X
9
Exit
Troubleshooting Glossary
"Configuring TCP/IP"
SBV5120 Series VoIP Cable Modem User Guide
License
on page 19.