Gateway > Wan Page - Motorola SBG900 User Manual

Motorola user guide wireless cable modem gateway sbg900
Hide thumbs Also See for SBG900:
Table of Contents

Advertisement

Overview Installation Troubleshooting Contact
Gateway > WAN Page
Use this page to configure the external (public) wide area network (WAN) interface:
Gateway > WAN page fields
Field
Host Name
Enable DHCP Client
Disable DHCP Client
Static IP Address
Static IP Subnet Mask
WAN Default Gateway
Home
Print
Configuration: Basic Gateway TCP/IP Wireless USB
Description
If the cable service provider requires a hostname to access to their network, type the hostname
they provided in this field. The default is None.
Enabling the DHCP client causes the wireless gateway to automatically obtain the
address,
subnet
mask,
domain
enabled if the cable service provider automatically assigns a public IP address from their
DHCP server. Enable DHCP Client is on by default.
If the cable service provider does not automatically assign a public IP address using DHCP,
they must provide a
static IP
DHCP client, you must type the static IP address, subnet mask, DNS server(s), and domain
name (if necessary) in the fields provided. Disable DHCP Client is off by default.
If Disable DHCP Client is on, type the static IP address provided by the cable service provider
in
dotted-decimal
format. The default is None.
If Disable DHCP Client is on, type the subnet mask associated with the static IP address in
dotted-decimal format. The default is None.
When using a statically assigned IP address from your ISP, enter the default gateway the SBG
should be using to communicate with on the WAN.
X
39
Exit
FAQ
Specifications Glossary License
name, and
DNS
server(s). Most commonly, the DHCP client is
address. Select Disable DHCP Client. When you disable the
SBG900 User Guide
public IP

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents