Setting Up A Usb Driver - Motorola SBG1000 User Manual

Overview Installation Troubleshooting Contact

Setting Up a USB Driver

The following subsections describe setting up a USB driver if you connect a PC to the USB port on the SBG.
Perform one of the following procedures based on your Windows version:
•
"Setting Up a USB Driver in Windows 98"
•
"Setting Up a USB Driver in Windows 2000"
•
"Setting Up a USB Driver in Windows Me"
•
"Setting Up a USB Driver in Windows XP"
The SBG1000 USB driver does not support Macintosh or UNIX computers. For those systems, you can connect
through Ethernet only.
CAUTION!
Be sure the Motorola SBG1000 Wireless Cable Modem Gateway CD-ROM is inserted in the
CD-ROM drive before you plug in the USB cable.
If you have a problem setting up the USB driver, remove it by performing one of the following procedures:
•
"Removing the USB Driver from Windows 98 or Windows Me"
•
"Removing the USB Driver from Windows 2000"
•
"Removing the USB Driver from Windows XP"
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
on page 96
on page 100
on page 103
on page 104
on page 111
X
95
Exit
FAQ Specifications Glossary License
on page 105
on page 108
SBG1000 Wireless Cable Modem Gateway User Guide