Gateway > Port Forwarding - Config Page - Motorola SBG900 User Manual

Overview Installation Troubleshooting Contact
Gateway > PORT FORWARDING — config Page
Use this page to configure up to 32 virtual servers:
Gateway > PORT FORWARDING — config page fields
Field
ADD NEW PORT
FORWARDING ENTRY
Template
Name
Port Start
Port End
LAN IP Address
Enable
Add
PORT FORWARDING
Home Print
Configuration: Basic Gateway TCP/IP Wireless USB
Description
You can configure up to 32 virtual servers.
If you select Custom, you must set the Name, Port Start, Port End, and LAN IP Address.
If you select a predefined template such as HTTP or FTP, the Name, Port Start, Port End
values are provided. You only need to enter LAN IP Address and change default values only
if necessary.
Type a unique identifier for the custom virtual server. The typical practice is to use the
protocol as a unique identifier (for example "ftp").
Sets the LAN internal interface port or the start of a port range. Inbound Internet connection
requests are statically mapped to this port.
If a range of ports is required, sets the end of the port range.
Sets the private LAN IP address for the port forwarding page. An Internet user must know the
public IP address to access any port forwarding entry you define on the private LAN.
Check this box to enable the port forwarding entries to be accessed through NAT.
Click to add the virtual server to the PORT FORWARDING list.
Displays the configured custom virtual servers.
X
45
Exit
FAQ Specifications Glossary License
SBG900 User Guide