Link Assembly Removal; Roll Assembly Removal - Epson EPL-9000 Service Manual

Disassembly andAssemMy
3.2.4 Paper Transportation Section Disassembly
This section describes how to disassemble the paper transportation section.

3.2.4.1 Link Assembly Removal

1. Remove thetopcover. (Refer toSection3.2.l.2.)
2. Remove theleftcover. (Refer to Section
3. Pull out the paper cassette about
4. Open the front cover unit.
Remove the shatter lever.
6. Remove CBB screws
2
frame.
Remove the link assembly while opening the
7.
Figure 3-23. Removing the Link Assembly
3.2.4.2

Roll Assembly Removal

front
Disconnect connectors P/J26and
2.
3. Remove 3 screws
wire.)
4. Remove the roll assembly.
Figure 3-24.
3-16
(3.94 inches) towards the front.
x 8) securing the link assembly, and remove it from the ROS unit
from the
x 8) securing the
the
Shatter Lever
roll assembly.
assembly. (1 screw holds the
Roll Assembly
earth
Rev.