Epson EPL-9000 Service Manual page 92

Manual
Video Controller Board
3.2.2.2
1. Remove the rear cover. (Refer to Section 3.2.1.1.)
Remove the top cover. (Refer to Section 3.2.1.2.)
2.
Remove the left cover. (Refer to Section 3.2.1.3.)
3.
Remove the right cover. (Refer to Section 3.2.1.4.)
Remove the shield cover. (Refer to Section 3.2.2.1. Steps 1 to 5)
5.
6. Remove 2 CP screws
7. Remove 3 screws
8.
Remove 2 screws
Remove the option interface guide.
9.
10.
Remove 4 screws
rear shield cover, and remove it.
11. Disconnect and
12.
Remove 7 CP screws
13. Remove the MAIN board.
Figure 3-7. Removing the
Rev. A
MAIN Board) Removal
6) securing the font cartridge connector, and remove it.
x
x 6) securing the font
x 6) securing the option interface cover, and remove it.
x 6), 2 serial interface connector screws, and 2 small screws from the
from the MAIN board.
x 6).
Disassembly and Assembly
guide and cover, and remove them.
MAIN Board
3-7