Epson EPL-9000 Service Manual page 112

Manual
Thermostat Removal
3.2.5.7
Remove the top cover. (Refer to Section 3.2.1.2.)
1.
Remove the fusing unit. (Refer to Section 3.2.5.1.)
2.
Remove 2 CB screws
3.
remove the inlet chute.
Remove 2 screws
5. Remove 2 screws
6. Remove 2 screws
Remove the pressure roller. (Refer to Section 3.2.5.2.)
7.
Remove the eject chute. (Refer to Section 3.2.5.3.)
8.
Remove the heater. (Refer to Section 3.2.5.5.)
9.
Remove the heat roller. (Refer to Section 3.2.5.6.)
10.
11.
Remove 2 screws
Rev.
x 6) securing the inlet chute at the bottom of the fusing unit, and
x 8) securing the fusing unit top cover, and remove it.
x 8) securing the fusing unit cover R, and remove it.
x 8) securing the fusing unit cover L, and remove it.
x 6) securing the thermostat, and remove it.
Figure 3-43. Removing the Thermostat
Disassembly and Assembly
3-27