and Assembly
3.2.6.2
SENSOR
1. Remove the rear cover.
2. Remove
3. Remove
4. Remove the right cover. (Refer to Section
Remove the ELECcover.
5.
6. Remove the fusing unit. (Refer to Section
7. Disconnect connector
8.
2
9. Remove
Figure 3-47. Removing the
3.2.6.3 Erase Lamp Removal
1. Remove therear cover. (Refer to Section
2. Remove the fusing unit. (Refer to Section
3. Remove 3
screws
4 .
ect the connector from the erase lamp.
Figure 3-48. Removing the Erase Lamp
Board
1.1.)
(Refer to Section
Section 3.2.13.)
to Section
from the
sensor.
x 8) securing the
x8) securing the
x 8) securing the erase lamp, and remove it.
sensor
sensor board, and remove it.
SENSOR
Board
-
it.
Rev.
. .
I