Epson EPL-9000 Service Manual page 110

Service Manual
Heater Removal
3.2.5.5
Never touch the heater with your bare hands
1. Remove the top cover. (Refer to Section 3.2.1.2.)
Remove the fusing unit. (Refer to Section 3.2.5.1.)
2.
3 Remove 2 screws
Remove the eject chute. (Refer to Section 3.2.5.3.)
4.
Remove 2 screws
5.
Remove 2 screws
6.
7. Remove the sensor cover and remove
remove the thermistor.
8. Remove 1 screw
9. Remove 1
10.
Remove 2 screws
11.
Remove 1 CP screw
Sensor Cover
Rev.
x 8) securing the fusing unit top cover, and remove it.
x 8) securing the fusing unit cover R, and remove it.
x 8) securing the fusing unit cover L, and remove it.
x 8) securing the earth wire.
screw x 6) securing connector
x 8) securing comector
x 6) securing the heater, and remove it.
Figure 3-41. Removing the Heater
Disassembly and Assembly
x 10) securing the thermistor, and
saew
)(
3-25