Epson EPL-9000 Service Manual page 111

and Assembly
Heat Roller Removal
3.2.5.6
1. Remove the top cover. (Refer to Section 3.2.1.2.)
Remove the fusing unit. (Refer to Section 3.2.5.1.)
2.
3 Remove 2 CB screws
remove the inlet chute.
4. Remove 2 screws
5. Remove 2 screws
6. Remove 2 screws
Remove the pressure roller. (Refer to Section 3.2.5.2.)
7.
Remove the eject chute. (Refer to
8.
Remove the heater. (Refer to Section 3.2.5.5.)
9.
Remove the H/R ring securing the right side of the heat roller, and remove the H/R gear.
10.
11. Remove the heat roller along with the left H/R ring and H/R bearing L.
12. Remove the H/R ring and H/R bearing L from the heat roller.
o
H/R
Bearing
3-26
x 6) securing the inlet chute at the bottom of the fusing unit, and
x 8) securing the fusing unit top cover, and remove it.
8) securing the fusing unit cover R, and remove it.
x
8) securing the fusing unit cover L, and remove it.
x
3.25.3.)
Figure 3-42. Removing the Heat Roller
Service
ear
H/R Ring
Rev.