Epson EPL-9000 Service Manual page 93

Disassembly and
3.2.2.3 Engine Controller Board
1. Remove therearcover.
2. Remove thetopcover. (Refer to Section
3. Remove theleftcover.
4. Remove therightcover. (Refer to Section
5. Remove the ELECcover. (Refer to Section
6. connectors
engine controller board.
7. Remove 5 CBB screws
Figure 3-8. Removing the
3.2.2.4 High Voltage
1.
Remove the rear cover. (Refer to Section 3.2.1.1.)
2. Remove the top cover. (Refer to Section 3.2.12)
3. Remove the
4. Remove the right cover.
5. Remove the ELEC cover. (Refer to Section 322.1.)
6.
7.
Remove the volume adjustment knob.
8.
Remove 5 screws
Figure 3-9. Removing the
3-8
Section
x 6) securing the engine driver board, and remove it.
Board Board) Removal
(Refer to Section 3.2.13.)
to Section 3.2.1.4.)
P/Jill,
x 8) securing the HVPS board, and remove it.
Removal
and
Board
DS, TR, and from the
Board
from the
-----
Rev. A