Cover Sheet - Oki MB770dn User Manual

EDITING FUNCTIONS

Cover Sheet

1
You can add a special type of paper such as colored paper as
a front cover sheet or a back cover sheet. This function is
called "cover sheet". In the cover sheet mode, you can select
whether or not to copy the front or back cover sheet as shown
in the table below.
Mode
2
NONE Does not add a sheet as the front cover
BLANK Adds a blank sheet as the front cover
TOP COPIED Adds a sheet copied on the top side as the
front cover
BOTH COPIED Adds a sheet copied on both sides as the
front cover
3
Mode
NONE Does not add a sheet as the back cover
BLANK Adds a blank sheet as the back cover
4
TOP COPIED Adds a sheet copied on the top side as the
back cover
BOTH COPIED Adds a sheet copied on both sides as the
back cover
ONLY BACK Adds a sheet copied on the back side as
COPIED the back cover
Example: Selecting "TOP COPIED" for the front cover
5
and "BLANK" for the back cover
A sheet copied on the top is added as the front cover and a
blank sheet as the back cover.
6
1
Place the paper for the cover sheets.
Place it on the multi-purpose tray or in a tray previously
set for cover sheets. The paper for the cover sheets must
be placed in a different paper source than normal paper.
7
Note
• When placing paper in a tray for cover sheets, be sure
to select "COVER" as the paper type, and also set the
paper size and thickness.
• When placing paper on the multi-purpose tray, be sure
to set the paper size and thickness.
 Basic Guide
• Place the paper for cover sheets of the same size as
normal paper in the same direction.
Front cover
Description
Back cover
Description
2
Place the normal paper in the tray(s).
3
Place the original(s).
When placing them on the document glass, they must be
placed from the first page.
4
Press [COVER SHEET] on the EDIT menu.
5
Select the front and back cover settings,
and then press [OK].
Memo
• You can select [BOTH COPIED] for the front or back
cover sheet only when [1->2 DUPLEX] or [2->2
DUPLEX] is set for the 2-sided copy mode on the basic
menu.
6
Press the [BASIC] tab to display the BASIC
menu. Then select a tray in which normal
paper is placed (not the one for the cover
sheets).
You must place the normal paper of the same size and
direction as that for the cover sheets in advance.
- 86 -