802.1X Settings; Setting Ieee 802.1X Authentication - Oki MB770dn User Manual

Memo
• When you press [USER NAME], [NEW PASSWORD]
or [RETYPE NEW PASSWORD], the on-screen
keyboard is displayed.
For details of the on-screen keyboard, see the
following page:
 P.300 "On-screen keyboard"
• The input password appears as asterisks (*) in the
[NEW PASSWORD] and [RETYPE NEW PASSWORD]
boxes.

802.1X SETTINGS

You can make settings for IEEE 802.1X authentication that will
apply to wired networks.
This equipment supports the following authentication methods:
• EAP-MSCHAPv2
• EAP-MD5
• EAP-TLS
*1
• PEAP
The following protocols are available for inner
authentication:
- EAP-MSCHAPv2
• EAP-TTLS
The following protocols are available for inner
authentication:
- PAP
- CHAP
- EAP-MSCHAPv2
- EAP-MD5
*1 PEAP cannot be used for Windows Server 2008.
To enable IEEE 802.1X authentication, you must install
certificates in this equipment as required, using TopAccess.
The certificates that must be installed are as follows.
Inner
Authenticatio
Authenticatio
n Method
n Method
EAP- -
MSCHAPv2
EAP-MD5 -
EAP-TLS -
PEAP EAP-
MSCHAPv2
EAP-TTLS PAP
CHAP
EAP-MD5
EAP-
MSCHAPv2
*1 The CA certificate must be installed in this equipment before the
settings for IEEE 802.1X authentication are performed.
*2 The user certificate must be installed in this equipment before the
settings for IEEE 802.1X authentication are performed.
CA User
Certificate Certificate
- -
- -
*1 *2
Necessary Necessary
-
*1
Necessary
-
*1
Necessary
-
*1
Necessary
-
*1
Necessary
-
*1
Necessary
Memo
• For instructions on how to install certificates, refer to the
TopAccess Guide "Chapter 8: [Administration] Tab
Page".
• For instructions on how to display the WIRED 802.1X
SETTINGS screen, see the following page:
 P.232 "Accessing the Admin Menu"

Setting IEEE 802.1X authentication

1
On the WIRED 802.1X SETTINGS screen,
specify the following items as required and
press [NEXT].
Item name
802.1X
CHECK
SETTINGS
FACTORY
DEFAULT
- 285 -
SETTING ITEMS (ADMIN)
Description
• ENABLE — Press this button
to use IEEE 802.1X
authentication.
• DISABLE — Press this button
to disable IEEE 802.1X
authentication.
Memo
• When changing
IEEE802.1X authentication
from [ENABLE] to
[DISABLE], press [Next],
and on the "Confirm the
following settings" screen
that appears, press [APPLY
NOW] to complete the
setting.
Press this button to confirm the
options currently selected.
Note
• [CHECK SETTINGS] is
available when you selected
[ENABLE] for 802.1X.
Press this button to reset the
IEEE802.1X settings back to the
factory defaults.
1
2
3
4
5
6
7