Mirror Image / Negative/Positive Reversal - Oki MB770dn User Manual

EDITING FUNCTIONS
5
Read the following 4 values to specify the
area using the left and top scales on the
document glass.
1
X1: From the top left to the left edge of the selected
area
X2: From the top left to the right edge of the selected
area
Y1: From the top left to the upper edge of the selected
area
Y2: From the top left to the lower edge of the selected
area
2
Note that the marks of the original scales have a 2 mm
(0.08") pitch.
3
6
Key in the read values.
1) Press [X1], [X2], [Y1] and [Y2], and then key in the
4
read values correspondingly.
2) You can specify up to 4 areas on 1 page. When
you want to specify more than one area, press
[AREA 1] to [AREA 4] to switch the area, and then
key in the values correspondingly.
3) Press [OK] after you have specified all the areas.
5
6
7
Place the original again on the document
glass with its face down.
Place it with its bottom right to you. Align its top side
against the left side of the document glass.
7
8
Select other copy modes as required, and
then press the [START] button on the
control panel.

Mirror image / Negative/positive reversal

You can reverse an image like a mirror (mirror image), or you
can reverse light-and-dark of an image (negative/positive
reversal).
Negative/Positive reversal
1
Place paper in the tray(s).
When using bypass copying, be sure to set the paper
size.
2
Place the original(s).
3
Press [EDITING] on the EDIT menu.
- 84 -
Mirror image