Setting Up The Ad Hoc Mode - Oki MB770dn User Manual

SETTING ITEMS (ADMIN)
4
Press [YES], and wait until the setting is
reflected.
1
2

Setting up the Ad Hoc Mode

The wireless settings can be operated from the Control Panel
of this equipment.
When setting up the equipment for the wireless network in the
3
Infrastructure Mode, follow the steps below.
1. Select the network type
 P.271 "Select network type"
2. Specify the SSID
P.272 "Specify SSID"

3. Select the security mode
 P.273 "Select security mode"
4
 Select network type
First access the WIRELESS SETTING screen from the ADMIN
menu from the Touch Panel Display to select the network type
for the wireless network.
Note
• If you are not sure what network type to select, see the
5
following section to determine the network type first.
1
Press [SETTING] button on the control
panel to enter the SETTING menu.
2
Press [ADMIN].
The ADMINISTRATOR PASSWORD screen is displayed.
3
Press [PASSWORD].
6
7
The input screen is displayed.
4
Enter the administrator password and
press [OK].
The ADMIN menu is displayed.
5
Press [WIRELESS SETTING].
The WIRELESS SETTING menu is displayed.
6
Press [WIRELESS SETTING].
The WIRELESS SETTING screen is displayed.
7
Press [ON] and press [NEXT].
The NETWORK TYPE screen is displayed.
- 280 -