Oki MB770dn User Manual page 274

SETTING ITEMS (ADMIN)
Note
• When using the WPA/WPA2/802.1X with the EAP-TLS
protocol, you must install the CA certification file and user
1
certification file in the equipment using TopAccess first. For
instructions on how to install the CA certification and user
certification files using TopAccess, refer to TopAccess
Guide.
1
Press [WPA], [WPA2] or [802.1X], and then
[NEXT].
2
3
The AUTHENTICATION SETTINGS screen is displayed.
Note
• To select [TKIP] or [AES (CCMP)], press [WPA] or
[WPA2], or to select [DYNAMIC WEP], press [802.1X].
4
2
Press [EAP-TLS] and press [NEXT].
5
The WIRELESS AUTHENTICATION (EAP-TLS) screen
is displayed.
3
Press [DISABLE] and press [EAP USER
6
NAME].
7
The letter entry screen is displayed.
Note
• Press [ENABLE] to use the user name from Common
Name in the User Certificate.
4
Enter the EAP user name using the
keyboard and digital keys and press [OK].
The screen returns to the WIRELESS
AUTHENTICATION (EAP-TLS) screen.
5
Press [NEXT].
The WIRELESS ENCRYPTION SETTINGS screen is
displayed.
6
Specify the following items and press
[NEXT].
• ENCRYPTION BETWEEN AP AND STA.
Select the encryption type that is used for the
communication between Access Point and this
equipment.
[TKIP] — Select this to use TKIP encryption. TKIP
provides a different key for per packet with a message
integrity check. This key will be changed for every fixed
interval.
[AES(CCMP)] — Select this to use AES encryption. AES
is the next-generation cryptography algorithm that the
U.S. government improves to replace the DES and
3DES.
- 274 -