Oki MB770dn User Manual page 253

2
Specify the following items as required and
press .
Item name
ENABLE DHCP • ENABLE — Press this button
(IP Address)
• DISABLE — Press this button
ENABLE DHCP • ENABLE — Press this button
(OPTIONS)
• DISABLE — Press this button
FQDN Option • ENABLE — Press this button
• DISABLE — Press this button
FQDN Update • CLIENT — Press this button to
Method
• SERVER — Press this button
Memo
• When you select [ENABLE] for the [ENABLE DHCP
(IP Address)] option, [ENABLE] is automatically set for
the [ENABLE DHCP (OPTIONS)] option.
Description
to use the IPv6 address issued
by the DHCPv6 server.
to disable the IPv6 address
issued by the DHCPv6 server.
to use the optional information
(IPv6 address for the DNS
server, etc.) other than the
IPv6 address for this
equipment issued by the
DHCPv6 server.
to not use the optional
information other than the IPv6
address for this equipment
issued by the DHCPv6 server.
to assign a FQDN (Fully
Qualified Domain Name) using
the DNS server.
to not assign a FQDN using
the DNS server.
update the DNS server from
this equipment.
to update the DNS server from
the DHCPv6 server.
3
Confirm the settings and press
Memo
• The IPv6 addresses acquired from routers are
displayed. Up to seven IPv6 addresses can be
retained.
Note
• When this equipment receives a router advertisement
(RA) from a router with the M flag set to "0", the
DHCPv6 function is disabled. When the router
advertisement (RA) M flag setting is changed from "0"
to "1" with the router settings, reboot this equipment by
using the [POWER] button on the control panel to
enable the DHCPv6 function.
4
Confirm the settings and press [OK].
You will be returned to the NETWORK menu.
Memo
• The IPv6 address acquired from the DHCPv6 server is
displayed.
- 253 -
SETTING ITEMS (ADMIN)
.
1
2
3
4
5
6
7