General Safety Warnings - Dremel 3D20 Original Instructions Manual

GB
ORIGINAL INSTRUCTIONS

GENERAL SAFETY WARNINGS

WARNING
!
MANUAL AND FAMILIARIZE YOURSELF
WITH THE DREMEL 3D20 BEFORE SETUP
AND USE. FAILURE TO COMPLY WITH THE
WARNINGS AND INSTRUCTIONS MAY RESULT IN
FIRE, EQUIPMENT DAMAGE, PROPERTY DAMAGE,
OR PERSONAL INJURY. SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE REFERENCE
WORK AREA SAFETY
a. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b. Do not operate Dremel 3D20 in the presence of
flammable liquids, gases or dust. Dremel 3D20
creates high temperatures which may ignite the
dust or fumes.
c. Store idle 3D20s out of reach of children and
other untrained persons. Injury can occur in
hands of untrained users.
ELECTRICAL SAFETY
a. Always use the Dremel 3D20 with a properly
grounded outlet. Do not modify Dremel 3D20
plug. Improper grounding and modified plugs
increase risk of electric shock.
b. Do not use Dremel 3D20 in damp or wet
locations. Do not expose Dremel 3D20 to rain.
Presence of moisture increases risk of electric
shock.
c. Do not abuse the cord. Never use the cord for
pulling or unplugging the Dremel 3D20.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
d. Avoid using this product during an electric
storm. There may be a remote risk of a power
surge from lightning that may result in electric
shock hazard.
e. In case of emergency unplug Dremel 3D20 from
outlet.
PERSONAL SAFETY
a. Stay alert, watch what you are doing and
use common sense when operating a Dremel
3D20. Do not use Dremel 3D20 while you are
tired or under the influence of drugs, alcohol
or medication. A moment of inattention while
operating Dremel 3D20 may result in personal
injury.
b. Use personal protective equipment. The use of
protective equipment such as heat resistant gloves
and safety glasses will reduce the risk of personal
injuries.
c. Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry
or long hair can be caught in moving parts.
DREMEL 3D20 USE AND CARE
a. Before every use check Dremel 3D20 for
misalignment or binding of moving parts,
breakage of parts and any other condition
READ ALL
INSTRUCTIONS IN THIS
2
that may affect the Dremel 3D20's operation.
If damage is suspected have the Dremel 3D20
repaired by autorized Dremel service center
before use. Use of Dremel 3D20 when damaged
may result in poor quality of object creation, further
equipment damage, property damage or personal
injury.
b. Do not touch the extruder tip during Dremel
3D20 operation or until it has cooled down to
at least 60°C (140°F). Contact with the extruder tip
during or after operation before tip has cooled may
result in personal injury.
c. Set up the Dremel 3D20 in a well-ventilated
area. Provide at least 8 inches of unobstructed
spacing around Dremel 3D20. Dremel 3D20
melts plastic during building. Plastic odors emitted
during Dremel 3D20 operation may irritate eyes
and airways. Locating Dremel 3D20 close to
surrounding objects prevents proper ventilation.
d. Do not reach inside the Dremel 3D20 while it is
in operation. Contact with Dremel 3D20 moving
parts during operation may result in poor build
quality, equipment damage or personal injury.
e. Do not leave the Dremel 3D20 unattended
during operation. Use of Dremel 3D20 by persons
unfamiliar with these warnings and instructions may
result equipment or property damage and personal
injury.
Use only DREMEL PLA filament. Use of filament
f.
not authorized by Dremel may result in equipment
and property damage.
g. Ensure small objects created by Dremel 3D20
are not accessible to young children. Small
objects are potential choking hazards for young
children.
h. Do not create illegal or inappropriate objects
using Dremel 3D20.
Do not use Dremel 3D20 to create objects
i.
intended for use with candles, liquid fuels,
and other heat sources. Plastic may melt when
exposed to fire or other heat sources. Such use of
objects created by Dremel 3D20 may result in fire,
property damage and personal injury.
Do not use Dremel 3D20 to create objects
j.
intended for food or drink applications
such as preparation, decoration, storage, or
consumption. Such use of objects created by
Dremel 3D20 may result in illness or personal
injury.
k. Do not use Dremel 3D20 to create objects
intended with use with electrical components or
housings of electrical components. PLA plastic
is not suitable for electrical applications. Such use
of objects created by Dremel 3D20 may result in
property damage and personal injury.
Do not put plastic objects in or around your
l.
mouth. PLA plastic is not suitable for food or drink
preparation and food utensils. Such use of objects
created by Dremel 3D20 may result in illness or
personal injury.
m. Do not use Dremel 3D20 to create objects
intended for chemical storage. PLA plastic is not
suitable for chemical storage. Such use of objects
created by Dremel 3D20 may result in property
damage and personal injury.
n. Do not modify Dremel 3D20 or alter factory
settings. Modifications may result in equipment
and property damage, and personal injury.
o. Do not expose Dremel 3D20 to temperatures
exceeding 70°C (158°F). Dremel 3D20 may
become damaged. Dremel 3D20 is intended to
operate in temperature between 16-29° C (60 - 85°
F).