Panasonic NN-CF873S Operating Instructions Manual page 17

Parts of your oven
Wire shelf
1. The wire shelf can be used in the upper
and middle shelf positions for GRILLING
foods. It can be used in the upper,
middle or lower shelf positions for
CONVECTION or COMBINATION
cooking.
2. Do not use any metal container directly
on the wire shelf in COMBINATION with
MICROWAVE.
3. Do not use the wire shelf in
MICROWAVE mode only.
4. The maximum weight that can be placed
on the wire shelf is 4 kg (8 lb 14 oz) (this
includes total weight of food and dish).
Wire shelf
Important user information - Please note
the plastic covers on the wire shelf are
designed to remain on the shelf when in use.
They are not packaging and must not be
discarded.
Enamel shelf
1. The enamel shelf is for cooking on
GRILL, CONVECTION or
TURBO-BAKE mode. Do not use on
TURBO-COOK or COMBINATION
modes.
2. For 2 level CONVECTION cooking, the
wire shelf can be used as the upper
level and the enamel shelf can be used
as the lower level.
3. The maximum weight that can be placed
on the enamel shelf is 4 kg (8 lb 14 oz) (this
includes total weight of food and dish).
Enamel shelf
F0003BH21BP_04_130820.indd 15 F0003BH21BP_04_130820.indd 15
Glass shelf
1. The glass shelf can be used in any of
the shelf positions for cooking on any
mode.
2. If the glass shelf is hot, let it cool before
cleaning or placing in cold water, as this
could crack or shatter the accessory.
3. The maximum weight that can be placed
on the glass shelf is 4 kg (8 lb 14 oz) (this
includes total weight of food and dish).
Plastic covers
Drip tray
1. Before using the oven, the drip tray
must be fi tted as it collects excess water
during cooking. The drip tray should
be removed and cleaned on a regular
basis.
2. Fit the drip tray by holding with both
hands and clicking onto the front legs of
the oven.
3. To remove the drip tray, hold with both
hands and gently ease forward. Wash in
warm soapy water. Re-position the drip
tray by clicking back onto the legs.
4. Built-in Oven using a Panasonic trim kit
Use caution when removing the trim kit
frame, as some exposed edges may be
sharp to touch and may cause injury.
To clean the drip tray, remove the trim kit
frame by opening the door, hold onto the
top frame and gently pull forward. Once
the clips are released, close the door, hold
onto the bottom two corners and pull
forward. Remove, clean and re-position
the drip tray. Push the trim kit frame back
into place ensuring all four corners are
secure.
5. DO NOT USE A DISHWASHER TO
CLEAN THE DRIP TRAY.
15
Glass shelf
Drip tray
2013-8-20 9:21:33 2013-8-20 9:21:33