Units of Measure
The Units of measure setting is used to configure label parameters for the printer. The units
are:
• Inches
• Millimeters
Once configured, you do not have to indicate "inches" or "millimeters" (or their globally
accepted abbreviations or marks) when entering numbers in data fields. Likewise, in any scale
or range of measurement field (as found under Label Type), the range of measurements will
automatically configure to the units selected in the Menu function.
To set the default units, on the Localization screen:
Under Units of Measure, touch the desired measurement.
1.
The initial default is inches. If you touch millimeters, a checkmark is placed in the box
preceding "millimeters" and is removed from the box preceding "inches."
When finished with the Localization screen, press OK
2.
Rev A
23
System Defaults
to accept the changes.
®
BBP
35/37 User's Manual