Pipe Markers; Standard Pipe Marker - Brady BBP 35 User Manual

Application Label Types

Pipe Markers

Pipe Marker labels are used to label what material flows through a pipe. There are three types
of pipe marker labels - Standard, Rollform, and Symbol/Arrow Type.
The Standard Label is placed along the length of the pipe. Contents of the label include text
and optional graphics. The direction of material flow is optional.
The Rollform Label is similar to standard pipe marker labels, except it is designed to wrap
around the circumference of the pipe.
The Symbol or Arrow Type pipe marker consists of a single symbol (graphic) or arrow that
repeats along the entire length of the label and wraps around the circumference of the pipe.
The Arrow wraps around the pipe and indicates the direction of the content's flow.

Standard Pipe Marker

The Standard Pipe Marker application enables you to accurately label contents of pipes,
conduits, and ducts according to the approved standards in the specific country. Directional
arrows can be included on one or both ends of the pipe marker, indicating flow direction.
These arrows are part of the template. Standard pipe marker layouts may be different
depending on the region you are in and what standards your printer supports.
Standard Pipe Marker applications are compatible with continuous media only. If no
continuous media is installed when the Standard Pipe Marker application is selected, a
message displays indicating incompatible media and the Standard Pipe Marker selection is
canceled.
®
Rev A 139 BBP 35/37 User's Manual