Setting Up the Printer
Connect Power
Plug the power cord into the power cord connection port on the right side of the printer.
1.
Plug the other end of the power cord into an electrical outlet.
2.
Turn the On/Off switch to the ON position.
3.
The printer automatically displays the primary Home Page. The size and color of the currently
installed media and other status indicators are shown.
Rev A
Before connecting power, be sure to remove the dessicant from inside the
media bay.
Note:
If there is no ribbon or media installed, the system defaults to black ribbon
and 4 in. [101.6 mm] wide continuous white media.
CAUTION
CAUTION
5
Setting Up the Printer
®
BBP
35/37 User's Manual