Printer Maintenance
Cleaning Upper Guide and Cut Pad
Overtime, dust and adhesive builds up on the upper guide and the cut pad. These parts can be
removed for cleaning.
Materials Required
• Magnetic screw driver
• BBP
• Isopropyl Alcohol
To remove the Upper Guide and Cut Pad:
Unscrew the XY plotter thumbscrew completely to remove it.
1.
Grasp the cutter module and gently pull up to remove it from the carriage.
2.
1
Using a magnetic screw driver (so screws do not drop into the printer) remove the upper
3.
guide screw.
To remove the upper guide, gently loosen the unscrewed end of the upper guide, then
4.
swing the guide out from under the XY cutter carriage.
Use a moistened wipe from the cleaning kit to clean the upper guide.
5.
3
®
BBP
35/37 User's Manual
®
35/37 Cleaning Kit
2
4
186
Rev A